| < Our Products front page |
|
SIGTEC LOCKNUT PAT.P |
Torque-Controllable Self-Locking Nut |
|
|
- A SIGTEC LOCKNUT has two parts per set. The tapered-washer tighten up the thread. It gives a strong locking power to the nut, securely tighten against vibration, shock and temperature.
- No special tools are required.
- Adequate torque control is easily achieved. Just assemble as a conventional nut.
- Optimizing cost saving, lobar cost and good workability.
|
 Available Sizes
Metric Sizes |
M8 × 1.25 |
M10 × 1.5 |
M12 × 1.75 |
M16 × 2.0 |
M20 × 2.5 |
|
|
Material;
nut: SWRM
tapered-washer: S45C
Finish;
hot dipped galvanized, zinc unichrome |
